|
Applications
and Benefits
The
XADO - Technology treatment is applicable and showed
excellent results in the following industrial applications:
Click
the links below for the list of treatment benefits
1. New
and Used Engines (Petrol and Diesel)
§
reduces
petrol or diesel fuel consumption at idle up to 30% and up to 5%
during driving;
§
increases
petrol or diesel engine power and torque;
§
increased
(up to 42.5%) and equalized compression in the cylinders;
§
ten
fold
decrease in concentration of CO and CH in exhaust (purification efficiency
for CO is up to 24%, for CH up to 88%);
§
decreased
of oil burn-out loss;
§
reconditions
and protects moving parts against wear;
§
reduce
friction coefficient up to 300 times;
§
lowered
noise and vibration up to 10 times;
§
stabilized
operation at any working conditions and regimes;
§
decreased
of pollutant emission in the air;
§
extended
protection in case of emergency oil leakage;
§ lower
requirements to the oil quality and longer operation time between oil
changes.
2.
New
and used manual transmission gearbox and reducers
§
up
to 15%
fuel saving, especially in all-wheel drive cars.
§
lower
gearbox transmission noise and vibration;
§
restoration
of the geometry of gearbox gears and transmission bearings;
§ smoothing
and filling up cavities.
3.
Hydraulic
steering Boosters
§
reduce
hydraulic steering back lash
§
increased
useful life;
§
restores
and reconditions worn-out metal parts;
§ reduced
hydraulic steering humming and roar.
4. Bearings
and Equal Angular Velocity Articulated Joints
§
restoration
of factory bearing specifications (dimensions and clearances) at about 80%
wear;
§
no
seizure of the unit;
§
resistance
to the aggressive environment;
§
eliminates
bearing ovality and conicity in reciprocating groups;
§
restores
and reconditions worn out surfaces by up to 0,5 mm;
§ decreased
noise and vibration level;
5. Machinery,
Equipment and Tools
§
restoration
of the worn and decreased gaps in the rubbing pairs of bed slides, gearboxes, shafts and spindle units;
§
restores
and reconditions machine tool accuracy of characteristics of the machine
tools up to the specifications;
§
decreased
machine tool noise and vibration level;
§
increased
pressure and improved operation of the hydro system;
§ decreased
energy consumption by up to 30%.
6.
Compressors
§
reduced
gaps in compressors crank mechanisms;
§
eliminated
ovality and conicity in reciprocating groups;
§
restored
compressors worn out surfaces up to 0,5 mm;
§
increased
oil pressure;
§
reduced
operating temperature;
§
decreased
noise and vibration level;
§ electric
energy saving of up to 25%.
7. Industrial
Reducers, Gearboxes and Transmissions
§
restoration
of worn parts, bearings and gears;
§
decreased
gaps and clearances up to the optimal specification
§
increased
the surface hardness (up to 600 kg/mm2) of the friction pairs, gear teeth
and bearings;
§
decreased
working temperature of the oil;
§
increased
oil pressure;
§
reduced
gearbox noise and vibration level;
§
restoration
or worn out surfaces (up to 1,05 mm);
§ decreased
energy consumption (by up to 35%).
8.
Industrial
Blowers and Smoke Extractors
§
restoration
of worn and decreased gaps between shaft and bearing;
§
reduced
blowers and smoke extractor noise and vibration level;
§
restoration
blowers and smoke extractor worn surfaces up to 0,05 mm;
§ save
up to 15% of electric energy.
9.
Oil
Pumps and Hydraulic Motors
§
increased
pressure and raised efficiency;
§
decrease
working temperature of the oil and hydraulic fluids;
§
restores
and reconditions worn surfaces up to 0,1 mm of the parts, bearings and
gears;
§
decreased
gaps and clearances up to the optimal specification
§
increased
the surface hardness (up to 600 kg/mm2) of the friction pairs,
gear teeth and bearings;
§
increased
pressure of the fluids;
§
decreased
noise and vibration level, stabilized operation;
§ decreased
energy consumption (by up to 35%).
10.
Presses,
Hammers and Dies
§
increased
pressure and raised efficiency;
§
decreased
working temperature of the oil and hydraulic fluids;
§
restored
worn-out surfaces up to 0,2 mm of the parts, bearings and gears;
§
decreased
gaps and clearances up to the optimal specification
§
increased
the surface hardness (up to 600 kg/mm2) of the friction pairs,
gear teeth and bearings;
§
decreased
working temperature and increased operating pressure of the fluids;
§
stabilized
operation of the hydraulic system;
§
decreased
noise and vibration level;
§ decreased
energy consumption (by up to 30%).
11.
Fuel
Equipment (high pressure fuel pumps)
§
increased
pressure and raised efficiency;
§
stabilized
operation
§
decreased
working temperature;
§
restored
worn-out surfaces up to 0,1 mm of the parts, bearings and gears;
§
decreased
gaps and clearances up to the optimal specification
§
increased
the surface hardness (up to 600 kg/mm2) of the friction pairs,
gear teeth and bearings;
§
increased
pressure of the fluids;
§
decreased
noise and vibration level;
§ fuel
consumption and saving down to 15%.
12.
Rolling
and Rounding Rolls
§
restored
wear out of parts, bearings and gears;
§
decreased
gaps and clearances up to the optimal specification
§
increased
the surface hardness (up to 600 kg/mm2) of the friction pairs,
gear teeth and bearings;
§
decreased
noise and vibration level;
§ restored
worn-out surfaces (up to 1,5 mm);
13.
Formers
of Different Configuration
§
increased
the surface hardness (up to 600 kg/mm2) of the friction pairs,
gear teeth and bearings;
§
decreased
noise and vibration level;
§
decreased
energy consumption;
§
elimination
of wear of the working surface of formers and probes;
§
elimination
of micro-damages on the working surfaces of the formers;
§
reliable
protection of the formers against aggressive medium;
§ long-term
maintenance of preset accuracy of formers shape and dimensions.
14.
2
Stroke Engines
§
2
stroke Motor Cycles;
§
2
stroke Scooters;
§
2
stroke outboard Engines;
§
2
stroke Lawn mowers;
§
Blowers;
§
Trimmers;
§
Chainsaws;
§
Generators;
§
Any
small engine
The treatment is exceptionally simple. You introduce the required
amount of gel (grease) and then, under normal operating conditions, the
result is achieved without the need for an expensive repair !!!
|
