Xado
- CV Joints Grease
|
450
Cartridge
Online Price:
£
11.63 inc
VAT
|
XADO
CV Joint Grease is the perfect grease for
Constant Velocity Joints
and will reduce wear by 2 to 2.5 times.
XADO CV Joint Grease is formulated for lubrication and
effective wear protection and due to XADO Revitalizant, the
protective cermet layer grows on the crystal lattice of the
metal surface. It is a superuniversal grease: applied to all
car units (vehicle hub bearings, ball bearings
and hinges, cardan joints of transmission, bearings of pump
and generator). It is also used in joints of industrial
and household equipment (open gearings, sliding
and frictionless bearings, pinions of manual polishing
machines, chains etc). It is also compatible with
automotive and industrial lithium greases of all types, can
be mixed with them in any proportion.
Advantages
This XADO grease is the best grease for constant
velocity joints. Due to the high-performance parameters XADO
grease exceeds any other greases that contain MoS2.
- perfect grease for
constant velocity joints, reduces wear by 2-2.5 times
- protects constant
velocity joints from moisture and contaminations for a
long time in case the duster is damaged
- super universal
grease: applied to all car units (marine bearings,
ball bearings and hinges, cardan transmission joints,
bearings of pump and generator). It is also used in
industrial and household equipment joints (open
gearings, sliding and frictionless bearings, pinions
of manual polishing machines, chains etc)
- compatible with
automotive and industrial lithium greases of all
types, can be mixed with them in any proportion.
- the grease keeps
perfect lubricating properties under any operating
mode (extremely heavy loads, high and low shear rate,
high temperatures, dust level and moisture)
- prevents formation of
scratches and corrosion, reduces noise and vibration
- due to atomic
revitalizant the grease keeps joint surfaces in top
condition
-
XADO grease for CV
joints doesn’t form abrasive and aggressive acids.
XADO grease for CV joints meets the requirements:
NLGI 2 (ASTM D217)
NLGI GC-LB ISO-L-XBCIB 2 (ISO 6743-9)
KOG2K-20 (DIN 51502)
Application
manual application
Remove the old grease and fill 1/2 of the bearing
(unit) volume with the grease.
with pressurized application
Add the grease through the zerk until desired grease
volume is reached.
Recommended for new joints and mechanisms. Use XADO
“Restoring” and “Repairing” greases for
essential restoring repair.
XADO
grease for CV joints meets the requirements:
NLGI 2 (ASTM D217)
NLGI GC-LB ISO-L-XBCIB 2 (ISO 6743-9)
KOG2K-20 (DIN 51502)
|
|
